Salaric

My mother likes earrings but does not have pierced ears so for mothers day I made her these star adn moon earrings. To do this I used:

*pink soft fimo

*white stone tectured fimo (ie it has flecks of grey and things in it)

*moon aspex cutter

*star aspex cutter

*UHU glue

*clip on earring backs

Fimo is a plastic clay that contains a solvent – this solvent can dissolve, certain plastics and ruins nail vanish if you are wearing it. For this reason I tend to use glass, wood and metal with it.

I rolled the limo out until it was about half a millimetre thick then I cut the shapes out using the spec cutters (little tiny cookie cutters), I did a large batch of different shapes and filled up a baking tray with them. For these earrings I lay the two shapes onto of each other slightly roughing up the surfaces where they over lap to help them stay together and become on shape on baking. I followed the instructions on the fimo packaging and pre heated the over and backed them for 30 an hour.

Once cooled I used the UHU glue to attach the jewellery findings ie the earring backs.

My little girl made this hanging flower at her preschool for Father’s Day – it is very simple and quiet effective.

It is a yellow card disc 12 cm or 4 3/4 inches across (diameter) on one side – the back there is a smaller circle with the message I Love my Daddy becuase he takes me to the park. The other side has tissue paper discs stuck on like petals in blue, purple and yellow. They are 7 1/2 cm across or 3 inches, with a blue card disc or circle in the middle saying Number One Daddy. There is a whole punch whole at the top through which a fluffy white pipe cleaner has been pushed through and twisted to itself to make a hanging loop!

She also made him this card – it is simply a piece of orange card folded into a greeting card with a picture Jean has drawn cut out and stuck on. The picture is Daddy in Green Felt Tip 😉

We also made him a Rocket cake which will appear on Salaric Cooking shortly! And in its defence all I can say is that icing isn’t like painting and polymer clay!

Last year my little girl came home with this car card for her Daddy on Fathers Day. It is literially the shape of a car cut out of folded red card with the roof acting as a ‘hinge’ so the card opens. She then painted it (with red paint!) and the nursery school drew on the windows and wheels. Very easy and effective – Jean enjoyed making it and it is still up in pride of place this year!

For Easter we tend to have an annul easter egg hunt and obviously baskets are needed to collect the eggs so I picked up several easter kits from the Pound Shop and in one of them was the bits to make a chicken basket.

The basket is made from a piece of stiff yellow paper which is a middle square with two chicken reliefs coming out the side and two other squares with side flaps coming out of the ends. Basically she decorated the two chicken shapes by squeezing white craft glue – PVA all over them and sprinkling sequines over the glue.

Once dry we folded it up and used cellotape to fix the flaps onto the sides of the chickens making the inner square the bottom of the basket – we decided cellotap would hold up better to the forces of having as many chocolate eggs as could possibly fit, rammed into it!

Jean was definate that it needed a handle though so I took a pink fluffy pipe cleaner and pushed each end through a chicken eye (these were wholes pre-cut into the chicken shapes and is no where near as gruesom as that sounds!) I bent the ends so they could twist around the main bit of the pipe cleaner above the eye making a handle.

To my suprise it survived the easter egg hunt!

My little girls Pre-School are having an easter bonnet parade so we needed to make Jean a hat. I found a kit in the Pound Shop in Cheltenham and so let my husband and little girl loose with it. I was going to make one from scratch but this kit was actually quiet good though the instructions didn’t match with the contence of the kit.

The kit had a circle that had had a smaller circle cut out of it – this was also in the pack. Two 1 1/2 wide strips of yellow card with tabs along both sides, assorted pom poms (which were the wronge size and colours for the instructions), goggly eyes we didn’t use and a strip of whit card with a ridge to bend at the end and two bunny teeth drawn on. There was also a blue think strip of card and PVA white craft glue, not too mention white bunny ear shapes out of card and pink card to cut the ear middles out off. I suplimented the kit with one white large pompom, a small pink pompom and three black fluffy pipe cleaners.

My husband made the hat up with her. First off they took the yellow strips and folded down the tabs – the ones on the top facing one way the ones on the bottom facing the other.

They then put glue on top of all of the bottom tabs and squidged the hats rim on, this was a bit fiddly as the strips where in two halves so , glue had to be attatched to the ends of them as well to make them stay in place as the side of the hat. Alaric had to hold it all together for awhile until the glue was tacky enough to hold. He then added glue to the top tabs – which were folded into the centre of the hat, he then placed the yellow circle on the top. It then had to be left for a bit to dry.

The blue ribbon was also in two strips which they glued around the hat. It then had to be left for an age to dry properlly.

In the mean time they cut out the pink bits of the ears which are upside down elongated tear drops. The pink card wasn’t really big enough for what in the instruction suggested so the ears look a bit odd. They glued the pink ear inners onto the white ears and left them too dry.

We also decided that glueing the small black pompoms into two slightly larger pompoms would make better eyes than the goggly eyes so they glued the ‘pupils’ onto the ‘eyeballs’ and left the whole lot to dry.

Once the glue was dry they glued the ears on the back of the hat so that they stuck up in the air and the teeth on the front so that they hung down over the edge of the rim.

They then glued on two white large pompoms for the rabbits cheeks (the kit came with one white and one yellow pompom :/) and a small pink pompom for the nose.

Alaric then cut the pipe cleaners in half coiled them into curls and twisted the ends together to make two sets of three whiskers. He glued these onto the face next to the cheeks and glued the pompom eyes on.

Me and my little girl made these easter eggs for two purposes – her ones have been writen on the back of and sent out as invites to the easter egg hunt and my ones have been stuck up around the house as decorations. They could also be used to stick on the front of cards to make festive easter cards.

First of all I drew an egg shape – this can be done by drawing two circles next to each other – one has to be smaller than the other – I then joined the two circles with two straight lines. I then cut out around the egg shape and gave it two my dad.

Dad then used it as a template, drew round it on different coloured card and cut them out for us.

I then gave them to Jean one at a time, poured some PVA white craft glue into a pot and gave it too her with a paint brush. I then gave her shapes I had punched out of card and scrap paper – mostly rabbits and ducks, a hug tub of glitter confetti and some glitter 3D paint pens.

Mainly Jean painted her eggs with glue.

Sprinkeled the glitter onto them.

Shock excess glitter off onto another sheet of paper so that it could be re-used.

And then left them to dry. She also added the glitter glues and 3D paints but squidged them all with her finger and then added more glitter from the shaker.

A few rabbits and ducks were stuck on but not many.

I personally experimented with drawing shapes with the PVA and then sprinckling them with the glitter – I did a heart, thick horizontal strips, think horizontal strips, a flower, a cross, spots that look like a paw print, a zig zag shell crack and then used the glitter pens to draw an orange glitter concentric spiral, a flower, and a blue irridescant wiggle.

This is a very simple project, Jean enjoyed it and I think the results are quiet nice.

Dad’s been moping about his Welsh ancestory lately so I thought I’d better cheer him up. I decided we would celebrate St David’s day on the 1st of March as he is the patron Saint of Wales. The symbols of Wales are daffodils and leeks due to some historical battle and I’d picked up a foam kit in the Pound Shop in Gloucestershire. This kit makes daffodils in a vase.

I started by constructing the blue vase; this came as six foam shapes but was actually very tricky to push together as some of the shapes where just slightly misaligned. Eventually I got there and it is a simple and pleasing shape.

The kit comes with foam heart sitckers in two sizes which I then stuck onto the sides of the vase in a horizontal line.

Then came the making of the flowers; this was actually incredibly easy.

First off all I found there were three different foam shapes that made up the flowers, plus a leaf shape. The outer petals, a middle piece that was like a serrated disc, and a long rectangle that had a hole in one end and a rounded off corner at the other.

I pushed the outer petals onto the green fluffy pipe cleaner.

I then slipped on the middle foam ‘disk’ and pushed the pipe cleaner through the hole in one of the long rectangles of foam. I pushed enough pipe cleaner through so that I could bend it over and twist the pipe cleaner to itself underneath the foam shape.

I then rolled the foam rectangle around the twisted pipe cleaner centre forming the ‘trumpet’ part of the daffodil.

I then moved the foam disk up the pipe cleaner and slid it over the bottom of the rolled up tube of foam – this holds the ‘trumpet’ of the daffodil in place.

I then moved the outer petals up so that they came up over where the pipe cleaner twists onto itself and so that it was flat against the back of the other two parts of the flower. The double thickness of pipe cleaner helps it all to stay in place.

I then threaded on the foam leaves. These had two holes in them to help the leaves sit nicely on the pipe cleaner, however during the first attempt I made at this I put the leaf on upside down :/

To finish the flowers I bent the pipe cleaner so that the head of the flower part was at a right angle to the stem.

I made all of the flowers with different colour combinations as there was orange, white and yellow foam flower shapes. I then placed the whole lot in the vase and presented it to my dad 🙂 This was easy to do and I’m going to get my scouts to make daffodils in a similar way.

I tend to make, paint and sew seascapes for me, my husband and my little girl. The history of this is to do with my undergraduate degree, a paleobiology module and me explaining colonial organisms to my husband. The particular organism I was taken with is called Bryozoa but I got it a bit mixed up with corals. Anyway my husband and I decided we were a ‘colony’ and I started producing pictures of the colony within an ocean bottom environment.

This is the latest and it was my Valentine’s card to him this year.

I got the card blank from a set of eight card blanks and card toppers from the Pound Shop and the rest, ie the picture, is all cut out of magizines and catalogues. They are stuck on using glue sticks.

I cut the shapes out including:

• Seaweed

• A rock

• Colonial organism like a coral coming out of its tube

• Fish

• Heart

I tend to sit down and chop up a page at a time of magazines into the shapes the colours and layout that the page suggests to me. So for the shapes I eventually chose for this card I just selected from things I’d already cut out.

I wanted a very clean and stylised look.

I started gluing the shapes on, first off the seaweed and the fish hidden in them. I made sure that some of the seaweed overlapped the fish and some did not. This involved peeling up bits that had already been stuck and was essential for the balance of the picture. The rock in the middle was then stuck on.

I then placed the coral onto the rock, making sure that the bottom of the coral overlapped the rock. I then placed on the fish in the background and the blue heart – the heart was purely to show it was a card for Valentine’s day.

Me and my daughter made these heart decorations for Valentine’s day. I made a template by drawing round a heart shaped token Jean had made at pre-school but for our Valentine’s meal my husband made a second template by simply folding a piece of paper in half and cutting a curve into it. When unfolded it was a symmetrical heart whereas my template was asymmetrical.

My dad then draw about 16 hearts and cut them out of red mounting card. This is slightly bigger than A4 and he found with careful placement he could get four hearts out of each sheet.

I then set things up so that we had PVA white craft glue, glitter confetti, sweet wrappers from the christmas Quality Street Chocolates, glitter pens, foam heart stickers from a Pound Shop Foam Rose making kit and tissue paper in various colours.

Jean painted the hearts with glue and then sprinkled glitter onto them. To save glitter we did this on a sheet of paper and then when we did the next heart that was on a different sheet of paper so that we could sprinkle the previously caught glitter onto it. We also shook each glittered heart to make sure that only well attached glitter remained.

Jean also used glitter pens and her fingers to decorate some of the hearts. She glued sweet wrappers on others and pieces of screwed up pink tissue paper. On one heart she only stuck on the foam hearts which looked quite nice.

I myself made a heart that was completely covered in little balls of screwed up pink tissue paper. This was quiet effective and gave the heart a sort of 3D furry texture.

I then put sticky pads on the back of each heart and placed them around our bookshelves.

I got this big box of Christmas Craft from The Works discount bookshop in Stroud. It cost me £3.99, which was reduced from about £7. It was full of coloured pom poms of various sizes, pipe cleaners in lots of colours including metallic ones, foam shapes, glitter pens, green and red lolly sticks, and ‘fashion cord’, PVA glue, plus some goggly eyes (these had red and green irises which was a bit weird).

I made some examples of this that you could make out of the pack and then handed over about one and a half big craft boxes minus the glitter pens to my Scout troop to play with. The glitter pens do not dry quickly enough to be used in a Scout troop. They also had the leftovers of the Big Spooky Craft Box from Halloween.

Here are what they produced! Apologies for the poor quality of the photos, I forgot the camera so had to rely on my phone to take the pictures with.

Christmas mobile:

He bent a star out of a silver metallic pipe cleaner, twisted a fluffy red and a fluffy white pipe cleaner together and bent it into a candy cane. For the other two were a foam cut-out Christmas tree and a yellow and gold pom pom. He tied each of these shapes to the lolly stick cross using some of the fashion cord, which was transparent plastic with sliver specks in it. I made the lolly stick cross for him out of two lolly sticks and pipe cleaners. I twisted the pipe cleaners around the middle of the two lolly sticks where I had overlapped them.

Three tiered snowman:

One of them just stuck three pom poms together in a row, starting with a large red pom pom for the base of the snowman, then a medium white pom pom and for the head a small white pom pom. He wrapped pipe cleaners around the joins to make it look neater and stuck on some goggly eyes. He then decided he wanted to make a halo for it which he did by bending one of the metallic gold pipe cleaners into a loop. The excess pipe cleaner he used to make it ‘hover’ about the snowman’s head.

Christmas tree in crisis:

Being impatient for the PVA glue to dry and seeing that I had ‘tied’ my green pom poms onto the lolly stick with pipe cleaner tinsel, one of the Scouts decided to do the same. He liked the effect so much though that he decided that the tree should just be a decoration made out of interlocking pipe cleaners giving it a surreal 70’s sci-fi egg look.

Candy canes:

One of the girls twisted red and white fluffy pipe cleaners together to get the candy cane effect and then cut the resulting twist into four. She then shaped them into little hooks. She really enjoyed doing this and so decided she would make some out of other colours as well. We had some left over stripy pipe cleaners from Halloween and she chose these to twist together.

Pipe cleaner Christmas tree:

One of the girls twisted a pipe cleaner into a Christmas tree shape and then decorated it with more pipe cleaners – generally the metallic type – as tinsel.

Surreal mobile:

One of the boys made this surreal mobile by twisting a red and a green fluffy pipe cleaner together to produce a twist effect; he then looped this to make a circle. Then he made a lolly stick cross in the way I had shown them to and weaved the circle onto this. This gave a fantastically strong frame to work with and was very neatly done. He then made bizarre but cute little creatures from the pom poms, foam shapes and goggly eyes. He then used more pipe cleaners to attach the little creatures to the mobile. It wasn’t very Christmassy but it was really effective.

Red Christmas tree monster:

This started off as a red Christmas tree because he couldn’t find three green pom poms but soon mutated into a monster. Like the Christmas trees he stuck three pom poms onto each other, large at the bottom, then medium and then a small sparkly red pom pom on the top. He used the lolly stick as a base for the moster, stuck on the yellow foam holly leaves as wings and then stuck on two goggly eyes, one green and one red, and just to make it more monster-esque, one eye is below the other rather than them being next to each other. He also used a pipe cleaner as a sort of belt for the monster.

Spiral pet:

This was again incredibly simple but very cute, if not very festive. One of the girls twisted a fluffy red and green striped pipe cleaner into a flat spiral (so that it was two dimensional and didn’t go up into a cone shape. She then just simply stuck two goggly eyes into it – again one red and one green to match the stripes I assume.

Red spider/octopus:

One of the girls made this by just sticking two red pom poms together, one slightly larger than the other, and then twisting a red fluffy pipe cleaner and a green fluffy pipe cleaner around its body (the slightly larger pom pom) as legs. She then stuck the googly eyes onto it, again one red and one green.

Pipe cleaner reindeer:

This is a little pipe cleaner reindeer. I unfortunately thought it was a dog which she fortunately took in good grace! She twisted the body shape out of a gold pipe cleaner. She actually cut it into three pieces to get the body and ears which were little folded loops and the the two sets of legs which were just bent into two sides of a triangle. She then stuck on a small sparkly red pom pom for the face and a tiny white pom pom for the tail. She then added on the goggly eyes.

Spiral decoration:

One of the boys made a set of these spiral decorations. He twisted two pipe cleaners of contrasting colour together, this was a much looser twist than those used for the candy canes. He then bent the result into a loose spiralling curl with a loop at the top for attaching string so that it can be hung up.

Eyes in the back of my head:

I unfortunately didn’t get a picture of this one but wished I had. One of the boys got a black pipe cleaner and then pom poms of varying sizes in white and red and cut holes through them so that he could thread them like beads onto the pipe cleaner. He managed all but the very smallest pom pom with the safety children’s scissors, the last one had to be done very carefully with the small scissors on my pen knife. He then positioned them along the pipe cleaner, the ends of which he bent so that they would loop over his ears like glasses. He then stuck a goggly eye on each pom pom and put it on so that the ‘eyeballs’ were staring out of the back of his head. It was so clever! I couldn’t stop laughing – again not very festive but a good laugh.